Has anyone tried using the thick solid copper racing exhaust gaskets? They can be installed/ replaced with out removing the exhaust header from the studs due to slotted bolt holes. I believe that they're also available in larger diameter port openings, which would work out well with the Vanagon ports. Als, what about Copper-Coat? I've heard of this copper-based sealant that's used by heavy equipment mechanics for gasketless exhaust joints. Just wondered if anyone has experience with using either of these on Vanagons or anything else for that matter....... Mike B.
>> OK, quick question... one I don't recall seeing addressed here. What >> sealer (if any) should be used on the various exhaust gaskets for a 1.9 >> engine? >> >> Tim |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.