Date:         Sun, 2 Apr 2006 15:11:35 -0700
Reply-To:     Zoltan <zolo@FOXINTERNET.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Zoltan <zolo@FOXINTERNET.NET>
Subject:      Re: Vanagon rust
Comments: To: Jens Jakob Andersen <jayjay@ZORCK.DK>
Content-type: text/plain; format=flowed; charset=iso-8859-1; reply-type=response

The major areas I look would be;
the inside of the sliding door bottom,
The inside of the rear hatch bottom,
front door steps,
under the inlet hook ups,
the most rear bottom panel,
behind the front bumper on top.

And to look at the wheel wells of course first.  The rear hatch has little
plugs and they must come out to let the water out.
The kitchen has to come out to take care of the rust behind it.  Once the
rust is contained, POR 15 is to apply (Paint-On-Rust) to shut the oxigen out
for any further rusting.
Zoltan

----- Original Message -----
From: "Jens Jakob Andersen" <jayjay@ZORCK.DK>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, April 02, 2006 2:47 AM
Subject: Re: Vanagon rust


> Hi,
>
> I've pulled the inside panels, and it looks OK in there.
>
> There are 2 holes at the end, out to the rearwheels.
>
> The bottom om the inside panels have a little rust, due to water
> running in aroung the windows.
>
> But else it looks OK.
>
> Seems to me that the major rust areas are due to neglect overmany years.
>
> But cross your fingers - when I begin to strip it, it might be
> worse........... (Knock on wood - PLEASE!!!!!!!!)
>
> /JJ
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.3.4/299 - Release Date: 2006.03.31.
>
>