Well, I cleand the ground at the transmission.Also, the grounds near the coil and the two set ofgrounds at the left, engine head. No change.I put a ground wire on the o2 sensor. Still no change.I got hose clamps on every single hose connection and same with the 8 places on the intake runners.I got a grounded afm and it has the capacitor added.Throttle switch is bueno. I can change the timing a bit either way , and change the big air screw a bit (with the idle staqbilizer bypassed). Still, I get the same amount of surge, 100-150 or so rpms. I suppose my main concern is passing emissions . Any hope here? any new suggestions? Go get tested on a rainy day? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.