Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (April 2006, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Mon, 10 Apr 2006 23:13:03 -0400
Reply-To:   Wesley Pegden <wes@CS.UCHICAGO.EDU>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Wesley Pegden <wes@CS.UCHICAGO.EDU>
Subject:   Re: which direction for the plates? Re: (followup) Re: part numbers for link hardware?
Comments:   To: Jake de Villiers <crescentbeachguitar@gmail.com>
In-Reply-To:   <71d9cdf90604061250q460598cehdf4cd8caf6c56ae@mail.gmail.com>
Content-Type:   text/plain; charset=ISO-8859-1

In that case, is there any reason not to use washers of the same size? That way I could even use stainless...

-Wes '84 1.9l

Jake de Villiers wrote: > Its a little counter-intuitive, but the concave side goes toward the > rubber bushing. > > Jake > > On 4/6/06, *Wesley Pegden* < wes@cs.uchicago.edu > <mailto:wes@cs.uchicago.edu>> wrote: > > Which direction are the plates supposed to go back on? (I forget > which > way I took them off...) I would have thought the top and bottom both > cupped towards the bushings, but the Bentley diagram makes it > looks like > they both cup upwards (so the upper one is away from the bushing). > This doesn't make sense to me.... > > Thanks again, > Wes > 1.9l > > Wesley Pegden wrote: > > Ken's hooking me with all but the plates... I'm looking for 3 of > these > > now... my old ones are pretty bad. > > > > -Wes > > > > > > Jake de Villiers wrote: > > > >> Have you tried calling Ken Wilford at VanAgain? > >> > >> On 4/5/06, *Wesley Pegden* < wes@cs.uchicago.edu > <mailto:wes@cs.uchicago.edu> > >> <mailto:wes@cs.uchicago.edu <mailto:wes@cs.uchicago.edu>>> wrote: > >> > >> I should have mentioned... I'm located in central new jersey. > >> > >> Wesley Pegden wrote: > >> > Also, > >> > does anybody have any idea how I can get these things by > >> Friday? I need > >> > 1 sleeve, 1 lower plate, 2 bushings, and 2 top > plates. At the very > >> > least, I'd like to get 2 of the bushings by Friday. I have a > >> feeling > >> > that when I call the dealer tomorrow morning, they're > going to > >> say it'll > >> > be next week before I can get them. Do I have any other > >> reasonable options? > >> > > >> > Thanks, > >> > Wes > >> > > >> > Wesley Pegden wrote: > >> > > >> >> Hi all, > >> >> Does anybody have the part number for the plate that > fits above the > >> >> bushing at the bottom of the stabilizer link? > >> >> > >> >> I have that the sleeve is part number 251411047 > >> >> I have that the lower plate is part number 251411043 > >> >> I have the bushings are 251411039 > >> >> What about the top plate? > >> >> > >> >> Thanks, > >> >> Wes > >> >> '84 1.9l > >> >> > >> >> > >> >> > >> > > >> > > >> > > >> > >> > >> > >> > >> -- > >> Jake > >> 1984 Vanagon GL > >> 1986 Westy Weekender "Dixie" > >> www.crescentbeachguitar.com > <http://www.crescentbeachguitar.com> > <http://www.crescentbeachguitar.com> > >> > > > > > > > > > -- > Jake > 1984 Vanagon GL > 1986 Westy Weekender "Dixie" > www.crescentbeachguitar.com <http://www.crescentbeachguitar.com>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.