I just did this job on my 86 Syncro today. I replaced both of them. In my experience I have found that if one is bad, usually they are both going that way and within a few months of replacing the one, you find yourself replacing the other. Replace both, flush the line out with new fluid and you should be good to go for many years to come. Just my opinion, Ken Wilford John 3:16 www.vanagain.com Brian Doss wrote: >My (1988) clutch is loosing "oompf". It seems to bleed down overnight, such that to start it up in the morning, I have to pump the pedal a few times, and put it in neutral to start it up. If I don't do this, the van lurches. After underway, it seems OK, but I have noticed some unusual resistance while shifting. I'm thinking maybe I should bleed and replenish the system, but if that doesn't work, I'm wondering how to determine if it is the fault of the master cylinder or the slave. Neither shows any outward signs of seepage. Any thoughts? > >Brian Doss >'88 Weekender > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.