Roger, when I check the timing on my '84, I clip the timing light lead that needs +12 volts on the +12 volt alternator terminal. I clip the lead that needs to connect to ground on the a spot on the frame that takes the lead away from the fan belt, etc. Please don't make the mistake I have made in the past and clip the sensor around the #2 plug wire. Make sure you use the #1 plug wire. John ----- Original Message ----- From: "roger sisler" <rogersisler2000@YAHOO.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Friday, April 14, 2006 4:26 PM Subject: timing light
> Where do you hook up a timing light in a vanagon? The 12V power lines. On > the starter? > > > --------------------------------- > How low will we go? Check out Yahoo! Messenger's low PC-to-Phone call > rates. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.