Date:         Mon, 10 Apr 2006 17:09:19 -0400
Reply-To:     Kenneth Wilford <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kenneth Wilford <kenwilfy@COMCAST.NET>
Subject:      Re: wiring problems 90 2WD
Comments: To: -------------------- <VW4X4@VERIZON.NET>
In-Reply-To:  <443A3CEB.3070604@verizon.net>
Content-Type: text/plain; charset="US-ASCII"

This is actually part of the harness that I advertised last week for $250.
It appears that the black wire goes into the small black box that is on the
firewall on the driver's side.  It plugs in there.

Thanks,
Ken Wilford
John 3:16
http://www.vanagain.com
http://www.strictlyvwauctions.com
http://www.eurovan.org
http://www.vwcabrio.org
Phone: (856)-327-4936
Fax: (856)-327-2242

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
--------------------
Sent: Monday, April 10, 2006 7:10 AM
To: vanagon@GERRY.VANAGON.COM
Subject: wiring problems 90 2WD


 I had a vanagon tow to my house late Sat. night.
DOA.   Wiring problem.    I got it running, but with a jumper cable.
There is a black wire that runs from the coil (+) to the fuel injection
relay.
Its bad.   It runs from the coil into the wiring harness
and at some point back to the relay.   I would like to fix it, rather
than jumper it out.    Any idea where VW makes these two wires
connect?                    Any ideas on this one?

                                        Joe  W.