Date:         Mon, 10 Apr 2006 11:32:53 -0400
Reply-To:     Roger Sisler <rogersisler2000@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Roger Sisler <rogersisler2000@YAHOO.COM>
Subject:      Re: Strange water dripping from AC cabinet; not condensation

I would check the 4 hinge hold down bolts for tightness. I think they have
goop on them for sealing.Maybe take one out and check.Next, I would check
the slots in the hinges, and see if they are adjusted all the way to either
end of the slot.If adjusted all the way towards the front, perhaps the
water is entering the rear end of teh pop top.Check your gasket to see that
it is fully pushed onto the fiberglass.Last, the two adjustment bolts on
the handle need to be adjusted so that the top is down tight in the
front.It can be a tight squeeze to open the top when the handle is adjusted
right.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.