Date:         Tue, 11 Apr 2006 15:49:44 -0400
Reply-To:     Dennis <guskersthecat@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis <guskersthecat@YAHOO.COM>
Subject:      Re: Upper wishbone bushes and no welder?

I did this repair on the road using a borrowed garage and the monster allen
wrench purchased from a local industrial supply.  The parts were
overnighted in.

Removed the arms, walked them over to a machine shop and shortly thereafter
had the new bushings pressed, and tacked in place.  It's a very quick job
for an equipped shop.

A quick alignment and we were all set for the trip home.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.