Date:         Sun, 16 Apr 2006 18:00:43 -0700
Reply-To:     David Marshall <mailinglist@FASTFORWARD.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Marshall <mailinglist@FASTFORWARD.CA>
Organization: Fast Forward Automotive
Subject:      Re: Ignition Switch Procedure?
Comments: To: dlwilhite@COMCAST.NET
In-Reply-To:  <041720060036.2982.4442E2F400010EB000000BA622058860140A9B0708040799040B@comcast.net>
Content-Type: text/plain; charset="US-ASCII"

I had to do this a month or so ago on my TriStar.

1       Remove steering wheel - 24mm socket required
2       Remove plastic around steering column - Phillips screw driver
3       Remove the wires from the wipers, signals and bottom of the ignition
switch
4       Remove the turn signal and wiper controls - small flat driver
required
5       Use key to put the lock cylinder in the unlocked position
6       Use a 6mm allen key to remove the bolt from the lock cylinder
7       Pull lock cylinder
8       Remove ignition switch with a small Phillips driver

Assembly is in reverse order - hope I didn't miss anything.

David Marshall

Fast Forward Automotive Inc.
4356 Quesnel-Hixon Road
Quesnel BC Canada V2J 6Z3

Internet          http://www.fastforward.ca
Email     sales@fastforward.ca

- Engine Conversions and Accessories for classic water-cooled Volkswagens
- Electrical harness fabrication and customization

Due to the large quantity of email we receive, please include previous email
correspondence when replying.  This will allow us to read the full dialogue
in one message so that we may provide you a quicker and more accurate
response.


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
David Wilhite
Sent: April 16, 2006 17:36
To: vanagon@GERRY.VANAGON.COM
Subject: Ignition Switch Procedure?

Anybody have the procedure for replacing the ignition switch?

Thanks,

David Wilhite
84' Westy
Middle Tennessee