VANAGON archives -- April 2006, week 3 (#252)

Date:         Tue, 18 Apr 2006 21:29:48 -0400
Reply-To:     Mike Bucchino <mbucchino@CHARTER.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Bucchino <mbucchino@CHARTER.NET>
Subject:      Re: Scrapping vanagon
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=response

Another use for a bus that's ready for the scrapyard.....

http://www.pistolwimp.com/media/41276/


----- Original Message -----
From: "Paul Guzyk" <paullist@GUZYK.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, April 17, 2006 9:33 PM
Subject: Re: Scrapping vanagon


> >Make sure it's one of the 7 inch (175mm) grinders. You will eat up a
> >gross
>>(144) of metal cutting disks with a 4.5 inch (112mm) grinder.
>
> I cut the nose of a Vanagon once with a Sawsall.
>
> Only took 1 1/2 blades, although a cutting torch would have been much
> faster...
>
> check out http://www.californiavan.com/nonose/ if you want to see a
> cross secction of the Vanagon floor/frame.
>

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.