Date:         Fri, 21 Apr 2006 13:25:46 -0400
Reply-To:     -------------------- <VW4X4@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         -------------------- <VW4X4@VERIZON.NET>
Comments: To: Oliver Gruber <osgruber@COMCAST.NET>
In-Reply-To:  <000c01c6655e$75268df0$0300a8c0@oliver7rfxuqdn>
Content-type: text/plain; charset=ISO-8859-1; format=flowed

Your best solution is to replace the 86-91 rect. style with
the 80-85 round style.  You then will find several of
H4 replacement bulbs that fit this round style.
                                                          joe.w


Oliver Gruber wrote:

>Hi everybody,
>
>
>
>            I was wondering if anyone might have, by chance an unused,
>broken, or cracked low beam (the rectangle one) along with the bracket,
>lying around.
>
>I would like to take a look at the mounting bracket and the back of the
>light housing itself. I would take either side as I would think that they
>would be mirrors of each other.
>
>I am trying to come up with a better solution than buying a set of E-code
>lamps. There are dozens of lamps that run H4 bulbs and only cost 30 to 40
>dollars each. If anyone's BTDT before and has some helpful advice that would
>be most welcome as well. Pictures would be nice too. I do this so I won't
>have to disassemble the front of my van before I have a plan (it's my wife's
>DD) I would like to explore this avenue before I think about anything else.
>
>
>
>Thanks to All,
>
>Oliver
>
>
>
>