Hey Roger, I was able to remove this lever using a small gear puller I picked up from Pep Boys. Good luck, Jake
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of roger sisler Sent: Wednesday, April 26, 2006 5:47 PM To: vanagon@GERRY.VANAGON.COM Subject: How does the clutch lever come off? The one that is actuated by the slave cylinder,. I removed the snap ring, but no pounding would pursuade the lever to come off. --------------------------------- Love cheap thrills? Enjoy PC-to-Phone calls to 30+ countries for just 2¢/min with Yahoo! Messenger with Voice. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.