Date: Mon, 24 Apr 2006 09:23:29 -0400
Reply-To: Tim Leek <tleek@LL.MIT.EDU>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Tim Leek <tleek@LL.MIT.EDU>
Subject: Re: bed problems
In-Reply-To: <444CCFA6.7070301@earthlink.net>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
Mark. Thanks, that sounds like good advice. What about the apparent
stickiness of the handle you pull up on (located in the middle of the
seat and in the back) to turn the bench into the bed? I imagine that
is why the post is loose -- because I've had to whale on the seat to
get it to release. Is there a magic lubricant to use? Should I just
squirt lithium grease liberally in there?
Tim Leek
Technical Staff
MIT Lincoln Laboratory
Lexington, MA, 02144
tleek@ll.mit.edu
On Apr 24, 2006, at 9:16 AM, mark drillock wrote:
> Joy has a Westy bed, not a GL bed. Your GL bed needs those metal
> posts to keep the heavy seatback from folding forward under heavy
> braking or collision. They are simply threaded into holes in the
> body. If loose, tighten them. The wrench flats are very shallow so
> you may need to pry the side panel off at least partly to get a
> wrench on them.
>
> Mark
>
> Tim Leek wrote:
>
>> Thanks for the post, Joy. There's no danger inherent in removing
>> those latches? I guess my worry would be that the seat would fold up
>> on my 3 boys if I ever slammed on the brakes ... Regardless, there
>> is still the issue of one of the posts wiggling around. That just
>> seems a bad thing. I guess I'll have a go at it with a wrench or
>> whatever next weekend.
>>
>> .........................................................
>>
>>
>> On Apr 23, 2006, at 1:29 PM, Joy Hecht wrote:
>>
>>> I removed all the latches for the bed to deal with that problem.
>>> Doesn't
>>> seem like there's any need to have those latches anyway.
>>>
>>> Joy
>>> ......................................................
>>> :::
>>> :::The bed in my 87 Vanagon GL (not a pop-top) is hard to unfold and
>>> :::seems to be getting worse. I have to pull up very hard on the
>>> handle
>>> :::and often give it a hard whack on one side to get the catches to
>>> :::release if from upright position. Yesterday I took a look at the
>>> :::little plastic-shrouded metal pin on the side that seems to be
>>> the
>>> :::problem and found it to be loose.
>>> :::
>>> :::Is this a know problem for which there are known solutions? Has
>>> :::anyone any advice to offer? I'm thinking of at least trying to
>>> :::tighten up the pin in question. Perhaps I should also squirt a
>>> load
>>> :::of lithium grease into the various mechanisms?
>>> :::
>>> :::Help.
>>> :::
>>
>
>
|