Dennis, as so often is the case, had it right on. I did the 2nd option, of adjusting the linkage rod one spline. The list comes through again.
On May 2, 2006, at 6:54 AM, Dennis Haynes wrote: > First attempt, loosen the shifter bracket on the trans, push > towards the > trans and tighten. This usually helps. If not, then you need to > turn the > rear linkage rod one spline counter clockwise, (facing front). Just > loosen the clamp, using vice grips, hold front rod while turning rear > unit you hear a faint click, tighten clamp and you should be set. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.