At 5/5/2006 08:27 PM, Rob wrote: >I changed my radiator in my '87 this evening after work. I was asked by p-mail why I changed my radiator, fair question. While trying to bleed it my helper seems to have tightened the bleeder screw a bit too much and the plastic cracked. I did try to fix it with JB Weld but that didn't work. At that point I figured it was an almost 20 year old radiator and I have (before) fought with radiator leaks, I didn't want to do it with this one. So I got a new one.
Rob becida@comcast.net Putting a '91 Subaru 2.2 into an '87 Vanagon in western Washington. Slowly, very slowly |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.