Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2006, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 6 May 2006 22:06:39 -0400
Reply-To:     Jonathan Farrugia <jfarrugi@UMICH.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jonathan Farrugia <jfarrugi@UMICH.EDU>
Subject:      Re: Welding S&S Exhaust ??
Comments: To: Tom Rowsell <sakow86@GMAIL.COM>
In-Reply-To:  <e1ac36740605061813u52e59bc5s90feb5e91f78ccc1@mail.gmail.com>
Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed

unless the pictures are deceiving it doesn't look like there is much metal there left to weld. it could be done but given the thinness of the metal and the distance of the gap it would be challenging to say the least. with a gap that big you would need a "patch" piece to span the distance.

jonathan

On Sat, 6 May 2006, Tom Rowsell wrote:

> Hi all: > > In an effort to postpone an expensive exhaust replacement, I'm wondering if > it would be possible to weld a "crack" in my S&S exhaust setup? See links to > pics below. The crack travels around almost 50% of the circumference of the > pipe. It is the pipe that joins to 4 to 1 junction to the cat, but near the > 4 to 1 end. Unlike to stock setup, the S&S one does not have a > "collector/manifold". I was hoping to get it welded "in place", since > removing the pipe seems unlikely. I "foolishly" attempted a muffler > cement/hose clamp repair, but it would not stick. > http://geoexploits.com/gallery2/main.php?g2_itemId=1149 > > My muffler is not S&S, and I "think" the crack occurred because I only have > the right-side muffler hanger, and no left one... > > > Thanks > Tom > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.