Volks, Al too The awning is held on by two brackets. They look like the small letter h. One h is mounted to the van open end up, the other to the awning open end down. The stem of the h is toward the van on the bracket attached to the van, the stem of the h on the awning is away from the van. The h on the van is attached to the van by a small, 7mm bolt screwed into a threaded insert. I presume to prevent it bouncing around. It's that threaded insert that I need to find. I'm hoping it's what was described as a Rev-nut by Jim Arnott. Mike |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.