Date:         Fri, 12 May 2006 17:38:51 -0400
Reply-To:     Mike Collum <collum@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Collum <collum@VERIZON.NET>
Subject:      Re: Reverse Lights
Comments: To: Jeff Lincoln <jtlincoln@PORTCITY.COM>
In-Reply-To:  <00d901c6760a$e4c823f0$206580c0@JTLINCOLN>
Content-type: text/plain; charset=ISO-8859-1; format=flowed

Those 2 wires plug onto the terminals of the backup light switch.  If
the lights are staying on, then the switch isn't returning to the off
position.

Remove the wires, unscrew the switch from the side of the transmission
and test the action of the switch's plunger.

It would he handy if you had an ohmmeter on the terminals while checking
the plunger.

The last time I checked, new switches were somewhere around $10.00.

Mike


Jeff Lincoln wrote:
> Since we are talking about lights maybe someone can answer this one. Quite a
> while ago I had to replace my clutch/pressure plate. To do this we had to
> remove the transmission from the engine, etc, etc.. Well, there are two
> wires that slide onto a couple tabs on the transmission for the reverse
> lights. Since hooking the wires back up the lights will come on the first
> time I put the van in reverse like they should but then they will never turn
> off again. I have tried swapping the wire with one another and that doesn't
> work either. So I just un-hooked them - it would be nice to have those
> lights back again though. Any ideas on why this is happening and how to fix
> it?
>
>
>
> Thank you,
>
>
>
> Jeff Lincoln
>
> 85' GL
>