If you crawl under the driver's side forward of the front wheel you can remove 3 bolts, with a 10mm wrench. which hold the washer tank in place. The pump is actually on the outside of this tank. Sometimes the tubing gets squashed when putting the tank back in so you might look for that. You can also determine if the wires are carrying electricity as they plug onto the pump right there and/or see if the pump is running but quiet. Mike
Preston Grimes wrote: > Wiper reservoir full. Engine on, I pull the right steering wheel stalk > towards me. No squirt, but wipers wipe. No washer motor/pump sound. I'm > suspecting a bad ground on the washer/pump motor. Anyone care to help with > quick and dirty to troubleshooting this issue? Thanks. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.