I stupidly had my linkage bound up and it wanted to idle at 3-4k rpm, because the gas pedal was pulled that far down...this was after replacing the clutch and the engine was pulled down a bit..I don't remember what it got hung up on but once I found it I really kicked myself... Dave 85 GL "Baby Bus" 85 "Goldy" On 5/15/06, steve vitale <steve@newsie.net> wrote: > > I replaced my bad idle stabilizer computer with one out of a subi > conversion > van. van now idles at 4000 rpm! i'm assuming i got another bad idle > computer. any other thoughts? > maybe my hall sender is really bad. is there a way to test those? > Steve >
-- Dave - KC9FYM http://fjazzbass.blogspot.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.