Pressure, fluid and braking efforts are fine...the lights just don't come on unless I press hard! -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Christopher Gronski Sent: Tuesday, May 16, 2006 11:20 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: brake light switch failure? The brae light switches (there are two for redundnacy) are hydraulic. What are your fluid levels and brake pressure like? Chris On 5/16/06, shawn feller <feller@carboncow.com> wrote: > What is the trend for this? > > My brake lights will not light unless considerable pressure is applied to > the pedal. I'm assuming there is an issue with the switch down low. > > Shawn > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.