On 5/17/06, Preston Grimes <87westy@gmail.com> wrote: > > Joe said: >>I then filled from the tube end<< > > Did you inject some fluid into the tube end of the pump? Or somehow remove > the emitter and pour it right down the tube into the pump? > > I bought a replacement pump at my FLAPS yesterday for ~$20. > > Should there be current in the wires that plug into the pump even if the > washer switch is in the off position? I took a reading yesterday and it read > over 20 volts key on washer pump switch off. I was expecing 12 volts. I > suspect I read the meter incorrectly, but there was definitely current. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.