Date:         Sun, 21 May 2006 23:14:58 -0400
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: Gas tank dents
Comments: To: Rob <becida@COMCAST.NET>
In-Reply-To:  <7.0.1.0.0.20060519170643.0382e600@comcast.net>
Content-type: text/plain; charset=us-ascii

It is frequent practices that shops think those supports under the tank
are suitable for lifting the van with the lift. Of course the tank get
damaged. Another possibility is that there is a problem with the tank
venting and the fuel pump suction is collapsing the tank. The tube at
the bottom of the carbon canister. It is common for the screen in the
canister to rust out allowing the fine carbon to fill the tube and clog
it. This is the only way air is supposed to enter the tank as the fuel
is used. Also, make sure the valve for it, (The black valve near the air
filter) is getting the proper vacuum signal. You should hear it click
when the throttle is opened.

Dennis


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Rob
Sent: Friday, May 19, 2006 8:09 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Gas tank dents

I was under my '87 the other day it looks like the tank is pushed up
on one side. It's not even touching the support strap on the drivers
side.
Anyone ever pulled this type of dent before?



Rob
becida@comcast.net

With a '91 Subaru 2.2 in an '87 Vanagon in western Washington. It
drives!