Looks like the 86 has the dynamic oil pressure warning system, but the 85 does not. If I put the 85 cluster in the van wired for the DOPWS, what type of oil pressure warning will I get? Just the light operating off of the .9 bar sensor? Edward At 05:55 PM 5/27/2006, Edward Maglott wrote: >I want to swap the cluster with tach from my 85 to the 86 which has no >tach. That should require no additional wiring, right? Everything seems >to be working except I have a flashing coolant light. the gauge stays at >the bottom but the light keeps on flashing. Coolant is not low, and it >doesn't flash with the 86 cluster in place. > >Thanks for any advice. >Edward |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.