Date:         Tue, 23 May 2006 19:46:44 -0400
Reply-To:     Roger Sisler <rogersisler2000@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Roger Sisler <rogersisler2000@YAHOO.COM>
Subject:      Re: Dometic

Hello there. This is interesting. I suspect that the rise before the
cooling is from the ammonia solution being heated to operating tempature.In
the "off mode" the ammonia solution is not warm enough to do the cooling
(sounds strange),but is very near warm enough. This needed increase in
tempature,for cooling, adds extra heat load to the rear of the frig.  I am
guessing that your probe is near the rear of the frig,and is picking this
up.You may want to add a small battery powered fan to circulate and even
out your readings.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.