Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2006, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 29 May 2006 21:30:22 -0400
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: Brake system overview
Comments: To: Larry Alofs <lalofs@RCN.COM>
In-Reply-To:  <447B67FF.1060503@rcn.com>
Content-type: text/plain; charset=US-ASCII

Both methods will work. The trick is to only one bleeder at a time so air does not get sucked back in. I like to do the front first as it is closer and more important.

Dennis

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Larry Alofs Sent: Monday, May 29, 2006 5:31 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Brake system overview

So Dennis, Your sequence for bleeding the brakes seems to be just the reverse of what's in the Bentley (47.8a). Any comment or explanation of the logic behind either one?

Larry A. p.s. Your approach agrees with that given by the makers of my Mityvac.

Dennis Haynes wrote:

>The Vanagon brakes are split front/rear, not diagonal. That diagonal >thing is mostly for light weight front drive cars. The front brakes are >directly connected to the master cylinder. There is a rear brake >pressure regulator, mounted on the right side from member near the spare >tire. There is not an external lever or other bypass means. > >The most important part of brake bleeding if you do not have a pressure >bleeder is patience. Fill the reservoir, open the bleeders and walk away >for a while. If you are lucky, some fluid will gravity feed through. The >hard part is getting the chamber in the master filled. Next, close all >bleeders. See if there is any pedal firmness. If not, open left front, >depress pedal, close bleeder, release pedal. You should see the fluid >level in the reservoir drop slightly as the Master sucks it in. Again, >open bleeder, depress pedal, close bleeder, release pedal. After left >front has a good flow, go to right front, then go to rears, one at a >time. > >Dennis > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.