It's actually a small bulb and you have to take your instrument cluster out to get to it. It's not that difficult to do. once you get the cluster out you have to remove some screws that hold the LED & light assembly into the cluster and then just pull the assembly out and you then have access to the LED's and the little bulb. If you have never taken your cover off to the cluster (which you have to do to get to your brake fluid) there are two recesses in the front of it. You put your fingers in there and you pull up and it will release (this usually takes more force than you might think but it will come off). Pascal '84 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.