Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2006, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 10 Jun 2006 17:35:48 -0500
Reply-To:     Jim Felder <felder@KNOLOGY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jim Felder <felder@KNOLOGY.NET>
Subject:      Re: A question for the electronically knowledgeable
Comments: To: mark drillock <drillock@earthlink.net>
In-Reply-To:  <448B288B.6030400@earthlink.net>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

Thanks, Mark. That's good to know. I guess the patch came about when someone replaced it.

Wonder where to start looking for the turn signal LEDS?

Jim

On Jun 10, 2006, at 3:16 PM, mark drillock wrote:

> That component is the voltage stabilizer. It has nothing to do with > the turn signals but it does provide the supply voltage for the > temp and fuel gauges. > > It is a 10 volt regulator. It takes the variable 12-14 volts from > the battery circuit and turns it into a stable 10 volts for the 2 > gauges. This prevents them from reading differently under various > conditions. Without it the gauges would read differently at night > or when the heater or headlights were on. > > Mark > > Jim Felder wrote: > >> I just removed the instrument cluster (didn't come with the car, I >> bought it on ebay about a year ago because it had an accurate fuel >> gauge) on my 83 diesel westy. Looking at the back of it just then >> when I brought it inside for safekeeping, I see that behind the clock >> side, on the back of the nacelle, is a connnector block on one side >> and an electronic component, affixed with a single screw, on the >> other. >> >> It is this electrical component I am asking about. It has three leads >> coming out of it, two of which are messily soldered two leads coming >> out of the blue cable. The middle of the three leads is connected to >> nothing. I can make out the letters TCA 700Y on the component, but >> other numbers are unreadable. >> >> What is this, and does it have anything to do with the fact that my >> temp and turn signal LEDs don't work? >> >> Thanks, >> >> Jim >> >> > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.