Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2006, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 12 Jun 2006 16:55:14 -0700
Reply-To:     John Bange <jbange@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Bange <jbange@GMAIL.COM>
Subject:      Re: Make your front door handles look brand new for free--- in 10
              minutres or less
In-Reply-To:  <20060612213619.31913.qmail@web60214.mail.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

> The front door handels on the vanagon are reversiable. The tops may be > crusty, but the bottoms are usually pristine,and never seen.Check em out. > Take the left handel and put it on the right side.Put the right , on the > left side(didnt need that , did you?)To do this , there is one(1) phillips > head screw holding each handel on. This screw is hidden behind the rubber > weather stripping. Pull it back and undo the screw. The handel will come > right off. It will go right back on. No fancy manuvering needed.Practiceputting it back on , before you go take the other off. It is sooooo ez to > do. You cant make a mistake,but then again maybe someone will find a > way. Gain your confidence with one handel then go for it.

This remids me of a story I heard once, since it related to my own experience removing and flipping my door handles. A man bough an old new england farmhouse, built some time in the mid 1700's. The back door out the kitchen was a good 18 inches off the ground, but fortunately someone had taken the time and trouble to drag a 10 inch thick, 4 foot wide, 2 foot deep cut slab of granite up there as a doorstep. The only problem with it was that over the years, a low spot had been worn in the middle towards the front from the passage of thousands of feet. 'No problem', thought the new owner, 'I'll just flip that slab over to put the bottom on top and it'll be square and even.' It took several hours of grunting and straining to drag it to the side, lift it up endwise, and push it over. As the dust cleared from the slab's return to horizontal, the man saw, much to his dismay, that the bottom had a low spot worn into it as well. Someone else, probably in the 1800's, already had that same idea and executed the same maneuver.

Like the farmhouse guy, I pulled off my door handle only to find it equally worn on the other side. Be sure to check the underside of the handle before removing.

-- John Bange '90 Vanagon - "Geldsauger"


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.