I have a '90 7 passenger Vanagon GL with AC. The evaporator coil in the back, in the plastic housing at the top has a leak. My repair guy (Konrad's AutoHause is Scotts Valley, CA) can't find the correct one. The one I need has the mounting flanges coming straight back off the end of the coil, in a quarter circle to screw into the lower plastic housing. The flange is actually the end cap for the coil as well as the mount. The ones we find have a flanges that go straight up and then bend out at 90 degrees. Does anyone have a clue as to where I can get the correct part? Has anyone modified or made a new mounting bracket to use the other style in my van? TIA Dave Hally |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.