I pulled the original small fuse block off behind the drivers seat that had the fuses for what I think was the fridge, water pump and led's on stove. I've since installed an new Optima and my own fuse panel but can't seem to figure out what wire powers the pump and led's. I've basically got the following;
Tried powering the Fuse Black Wires one at a time and turning on the faucet but nothing. Really need to get the sink working as I'm heading out Wed for a road trip. Any help would be appreciated. Probably should have made note of what was what before pulling everything. Thanks, Jeffrey Tschumperlin Bert - 87 Westy Syncro |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.