I have replaced them entirely with Marine Exhaust Hose. Get the wire reinforced, smooth outside type, 1 1/4" inside diameter. Will not kink with the gradual bends needed to follow the path of the original pipes. You will need to enlarge the hole in the crossmember where the pipes pass through, just like the Bentley says to do when replacing the metal pipes with the later plastic ones. This 1 1/4" hose easily connects to the existing radiator and engine hoses for models 1982 - 85 that came with metal cooling pipes. Here is a link to the hose I am using. http://cgi.ebay.com/ebaymotors/Marine-Hardwall-Exhaust-Water-Hose-1-1-4-ID_W0QQitemZ4550097209 Mark JP wrote: > Hi all, > > I need to replace my coolant pipes on my 84 westy's (not the flexible > one) > Those are the rigid ones that goes from the front to the rear of the > camper. > Any other replacement alternative beside the stainless steel pipes > sold by > mr prospect? Cant they be replaced by flexible pipes? If so, what is the > inside pipe diameter and where to get those. > > TIA > > -- > JP > 84 westy > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.