Date:         Sun, 25 Jun 2006 13:49:19 -0400
Reply-To:     robert shawn feller <carboncow@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         robert shawn feller <carboncow@GMAIL.COM>
Subject:      for those following my water temp sender/gauge inquiry here are
              some combined values...
Content-Type: text/plain; charset=UTF-8; format=flowed

this is a combo of three different sources including info from Bentley (not
in the book). Several of the Ohm values are actually readings from my gauge
with a resistance box attached to simulate values. Therefor this assumes my
gauge is correct. I used a scale of 10 (instead of 8) to reflect those
values on my gauge for greater precision. Actual values are from other
sources and the objective HOT/COLD was from Bentley (how stupid for such a
objective value!).


Since I don't think a chart is going to format well in our listserv system
go to this link for values:

http://carboncow.net/modules/tinycontent/index.php?id=7
--
shawn feller, ohio
1986 vw vanagon gl westfalia
1993 vw eurovan gl
plus a couple of saabs, boats, jet skis, dog and wife (all require to much
maintenance, accept the dog)...

www.carboncow.com
www.carboncow.net