Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2006, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 26 Jun 2006 09:02:39 -0700
Reply-To:     Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Subject:      Re: Cheap window fix. Was: Wind noises.... door - Followup
Comments: To: neil <goofymuso@yahoo.ca>
In-Reply-To:  <20060626010342.20586.qmail@web54714.mail.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

If you want a cheap and cheesy fix, build up the rubber seal with black polyurethane. Smear on a thin, smooth coating and let dry overnight before closing window (!). Build as necessary, but be warned, it is PERMANENT!

Jake

On 6/25/06, neil <goofymuso@yahoo.ca> wrote: > > --- s kraning <CaratTop90@CHARTER.NET> wrote: > > > Neil - > > Interesting DIY fix for the window. Any thoughts on > > what to do about the > > driver's side vent that does the same thing? If I > > press the vent window in > > whilst driving, the squeeling/ wind noise will stop. > > I don't think the same > > weather stripping technique would work there (I've > > tried something similar.) > > Coincidentally, there is a small dent on the sheet > > metal of the d/s door > > near the mirror (from the p/o)...wonder if this is > > significant? > > > Hmm...... > > I guess weather stripping is too thick. BTW, there are > different guages (2 that I've seen). > > If replacing w/new rubber isn't an option or isn't > needed, your latch might have too much play in it. Try > shimming a piece of paper or thin cardboard between > latch where it closes against metal frame. (are all > the screws tight?) You could try the paper/cardboard > at various spots between rubber and window itself. The > dent? Might be affecting the (for lack of better term) > window pivot thus affecting alignment of vent window > in question. Hard to say w/o seeing..... i.e. how big > is dent blah blah.... likely just worn out rubber > > > Cheers. > > > Neil Nicholson. > 1981 air cooled Westfalia. > Cheap-o web site: > > http://www.members.shaw.ca/tubanick/welcomewesty.html > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com >

-- Jake 1984 Vanagon GL 1986 Westy Weekender "Dixie" www.crescentbeachguitar.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.