This is on a '90 where the layout is different: A|B|C|D|E A= pump B= Pilot start button C= Thermostat knob D= Gas valve knob E= Mode selector Gas valve (D) open. Thermostat (C) set to 0: Pilot LED lights up. Turn thermostat (C) higher (cooler) pilot goes out. I'm going to pull the fridge out and investigate this week, hopefully. Thanks, andy On Wed, Jun 28, 2006 at 11:49:18AM -0400, Roger Sisler wrote: > Well, Duh. All this talk about a/c and dometics got me all excited.I went > and actually opened up the door of my dometic. Guess what I found? That > knob with the 0 and 1 that you are using to adjust you flame.It is the gas > turn on valve. It either turns the gas on,or off.Thats all it does. The > knob that you want is to the left.The thermistat knob.The mode switch is > betweem the gas knob and thermistat knob. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.