Date:         Mon, 26 Jun 2006 10:56:10 -0700
Reply-To:     Michael Elliott <j.michael.elliott@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael Elliott <j.michael.elliott@GMAIL.COM>
Subject:      Re: Need help on wiring
Comments: To: Jeffrey Tschumperlin <jkt.register@GMAIL.COM>
In-Reply-To:  <740fc34f0606260937h4a4bc888oe3b7abf5b36dfb1a@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Jeffrey Tschumperlin wrote:
> No help on this?  Not sure if I gave enough info.
>
> On 6/26/06, Jeffrey Tschumperlin <jkt.register@gmail.com> wrote:
>>
>> I pulled the original small fuse block off behind the drivers seat
>> ... I've since installed an new Optima and my own fuse panel but
>> can't seem to figure out what wire powers the pump and led's.  ...
>> Probably should have made note of what was what before pulling
>> everything.
Yeah, probably. No dumber than most things I do, though.

According my my Bentley, the two fuses are wired:

The first fuse, called S23, is fed by a Red 1.5mm wire which comes from
Pin 87 of the underseat relay. The other side of S23 is a Red 1.5mm wire
which goes to Pin 4 of the 6-pin connector that feeds the LED panel on
the stove. This is an 8-amp fuse

The second fuse, called S61, is fed by a Red 2.5mm wire which comes from
Pin 30 on the underseat relay. The other side is a Red 2.5mm wire which
connects to Pin 3 of a three-pin connector which powers the
refrigerator. This is a 16-amp fuse.

Hope this helps!

--
Mike "Rocket J Squirrel" Elliott
71 Type 2: the Wonderbus
84 Westfalia: Mellow Yellow ("The Electrical Banana")
74 Utility Trailer. Ladybug Trailer, Inc., San Juan Capistrano
KG6RCR