> > I'm trying to remove the glass from both of my front doors. Bentley > says to remove the two retaining bolts that attach the glass to the > regulator, and then "lift glass up and out". That's not working, as > the door frame is in the way. I removed the rubber channels on both > sides and above the glass, but that doesn't give enough extra space > either. I got the vent window frame loose, but it won't come all the > way out because the upper front corner of the main window is in the > way. I have to be careful not to scratch my window tint. What am I > overlooking? Thanks in advance!
With the top/rear weather stripping felt channel and the inner and outer scrapers removed, you should have enough room to rotate the glass 90 degrees, in which position it will lift right out.
-- John Bange '90 Vanagon - "Geldsauger" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.