http://www.eucasafari.vendioweb.com/AVP/
The local shop halted during the install of my new rebuilt AVP 2.0 motor when they saw something funny on the heads. I don't know how quite to explain, so please take a look at the photo's. basically part of the welded head seems to be chipping away, and they aren't sure if this is a failure or if the little bits should be bent and broken off prior to install, so they dont come out down the road and end up inside the motor. I took a few other shots as well, showing things that cause me a bit of concern. any advise, suggestions or other misc tomfoolery is of course welcomed. chris 81 aircooled |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.