Date:         Fri, 7 Jul 2006 07:33:23 -0700
Reply-To:     Shawn Wright <swright@ZUIKO.SLS.BC.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Shawn Wright <swright@ZUIKO.SLS.BC.CA>
Subject:      Re: Coolant bottle sensor leak?
In-Reply-To:  <2008fb6d0607070447i79ccf06aj5b171d6e33e46d82@mail.gmail.com>
Content-type: text/plain; charset=US-ASCII

If over-tightened, they can crack around the threads. The o-ring hardens, so may need a new
one. The sensor can also leak through the conductors, which is evident if the wire connector
is wet. Sealing the bottoms of the conductors (part in the tank) with epoxy will work, provided
you leave some metal exposed at the ends. They are cheap to replace though, and same as
used on A2 Golf/Jettas, so easy to find. Be sure to get a new o-ring, and lube with vaseline.
I've had all of the above occur at various times on my Westy and Jettas...

On 7 Jul 2006 at 7:47, David Bohannan <fjazzbass@GMAIL.COM> wrote:

> Volks,
>
> So whilst looking for other things to replace on my 85 (since I am already
> ordering the new rubber grommets from BD) I popped open the hatch to find a bit
> of coolant pooled in the top of the coolant bottle (under hatch, not behind
> license plate). The coolant had the sensor wet and I am wondering if there is a
> seal there I need to replace or what...
>
> I wasn't sure how to remove that sensor and didn't want to break anything
> (BTDT) so I figured I would shoot a note out to see if anyone was awake yet? Its
> Fryedaye....
>
> TIA!!!
>
> Dave
> 85 GL "Baby Bus"
> 85 "Goldy"
>
> --
> Dave - KC9FYM
> http://fjazzbass.blogspot.com
>


Shawn Wright
http://members.shaw.ca/vwdiesels
'88 Westy 1.6TD 5 speed
'85 Jetta Diesel 1.6NA