The wire from the temp switch on the fins is the hot wire. One thing to be aware of is that VW did not include a vehicle chassis ground wiring connection for the Dometic fridge case metal in the fridge wiring. It is isolated from the vehicle metal and thus can't be reliably used for measuring voltages or for a current return path. In the stock Westy the metal propane line acts as a chassis ground wire for the fridge. People doing testing with the fridge out and people doing custom installations should add a discrete ground wire from the fridge case metal to battery negative wiring. Not doing so will also keep the pilot led from working. Mark Mike Miller wrote: >Hi all, > >I'm putting a Westy interior in a country homes van. > >Regarding the Dometic: Does anyone know which way the wires should go to the >fan to have it push air up through the fins? > >That is, which wire is hot side? The wire from the sensor on the fins or the >other one? > >TIA > >Mike > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.