The nut is removable. To make it easier, I always remove the boot from the throttle body to the AFM. Then I can see and reach that nut with less trouble. Mike
Shawn Luft wrote: > Hi, > > > > I am having trouble removing the top bolt on the starter of my 1986 2.1L. > > After reading the archives it seems there is a nut holding the bolt on the > inside. > > > > Does anyone know if the nut on the inside is welded in place, or loose? > > Do you have any tricks to help me get the bolt off and then on again w/ the > new starter? > > > > Thanks, > > Shawn > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.