Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2006, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 13 Jul 2006 20:51:13 -0700
Reply-To:     obeechi@RUNBOX.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mark C <obeechi@RUNBOX.COM>
Subject:      Re: Squeaking bushings upfront ??
Comments: To: brian.keese@GMAIL.COM
In-Reply-To:  <b1217da60607130440s4e692c9cs4141bc0257f01d9@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

I just started having this problem (again) - which bushings are primarily responsible . . . I've used wd40 for locks, but it evaporates too quickly . . . used Power Lube and it lasted longer than wd40 . . . . but can't find it for sale . . . . if I could I would try that on bushings . . . but wont a petroleum based lube eat up rubber longer term? I'm just guessing that because they're both petroleum based aren't they....

From: Brian Keese <brian.keese@GMAIL.COM> To: vanagon@GERRY.VANAGON.COM Subject: Re: Squeaking bushings upfront ??

> I use white lithium grease in a spray can (available at NAPA and probably > anywhere else). It lasts about a year for me. > > On 7/12/06, Joseph Fortino <fortino1@earthlink.net> wrote: > > > > Thats what i use also WD40, sounded like an old matress driving around > > before ;-) > > seems right at the same time every year i need a couple shots of WD. > > REALLY DRY AND HOT > > > > > > -----Original Message----- > > >From: Jaap Nauta <bus.mail@IAE.NL> > > >Sent: Jul 11, 2006 8:18 AM > > >To: vanagon@GERRY.VANAGON.COM > > >Subject: Re: Squeaking bushings upfront ?? > > > > > >I just replaced the upper control arm bushings, that's the best thing to > > >do. I wished I had done it earlier. > > >But working on it I noticed that probably the best place to spray is on > > >the inside of the bushings, that is on the inner side of the control arm. > > >Jack up the front, and you'll see a small gap between the bushing and the > > >chassis. WD40 should do it > > > > > >Grt, Jaap > > >'87 Caravelle diesel > > > > > > > > >> Anybody recommend some magic goo you can spray on all the bushings up > > >> front that will slight lube between the bushing and the metal parts > > >> and will last more than a week ? > > >

----- End Original Message -----


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.