Date:         Mon, 10 Jul 2006 22:01:40 -0700
Reply-To:     mark drillock <drillock@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mark drillock <drillock@EARTHLINK.NET>
Subject:      Re: Another Dometic Question
Comments: To: Mike Miller <mwmiller@cwnet.com>
In-Reply-To:  <C0D86323.F33F%mwmiller@cwnet.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

As I recall, the 2 black wires that come out of the middle together
should go both go to a crimped on ring terminal. The ring terminal is
screwed to the van sheet metal, behind the kitchen unit.  If so, one is
the ground for the led display panel and the other is the ground for the
fridge 12 volt element and fan. Is one of the black wires a larger
diameter than the other? I don't have time right now  to check this in
more depth. but maybe tomorrow.

Mark

Mike Miller wrote:

>I've connected a wire from the ground screw on top of the fridge unit [in
>back] to a body ground. I get voltage to the water tank, pump, back of the
>indicator light panel yet nothing works. Not the pump, not the lights and
>while I can't really tell, I don't think the frig is working either.
>
>I had to make up a wire loom as the one with the unit were cut to remove it.
>
>The only wires on the chunk of loom I have that I can't really see where
>they went  are two black ones coming from the middle of the loom from the
>frig. The mighty squirrel told me how to read the wiring diagram so I'll try
>and look that up but does anyone have an idea on these wires?
>
>Mike
>
>
>