As I recall, the 2 black wires that come out of the middle together should go both go to a crimped on ring terminal. The ring terminal is screwed to the van sheet metal, behind the kitchen unit. If so, one is the ground for the led display panel and the other is the ground for the fridge 12 volt element and fan. Is one of the black wires a larger diameter than the other? I don't have time right now to check this in more depth. but maybe tomorrow. Mark Mike Miller wrote: >I've connected a wire from the ground screw on top of the fridge unit [in >back] to a body ground. I get voltage to the water tank, pump, back of the >indicator light panel yet nothing works. Not the pump, not the lights and >while I can't really tell, I don't think the frig is working either. > >I had to make up a wire loom as the one with the unit were cut to remove it. > >The only wires on the chunk of loom I have that I can't really see where >they went are two black ones coming from the middle of the loom from the >frig. The mighty squirrel told me how to read the wiring diagram so I'll try >and look that up but does anyone have an idea on these wires? > >Mike > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.