Worn fingers on the clutch release bearing can cause this, too. Mike
Joel VanderKwaak wrote: > Hello collective wisdom, > > As the subject line says, I'm experiencing occasional clutch chatter > when in > reverse. No noticeable problems in forward gears - drove 300 miles > yesterday > at 75 mph, then had vibration backing away from my garage. > > The archives of this and other lists suggest the following: > - loose engine mounts > - worn needle bearing > - main seal leak > > Anyone have other opinions or things to investigate? > > The clutch and related parts are about a year old (Luk heavy duty kit), > with > about 10K miles on them. The van is a 1991 Multivan with a syncro > transaxle. > > Thanks, > > Joel > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.