If you need to remove the bumper,it is held on by precious, little. The hardest part is removing the plastic plug on the end cap.I suggest drilling a small hole in the plug and inserting a screw and then pulling it off.Remove the end cap screw. That done, remove the rubber bumper gaurds. Just pry them off. this will expose a bolt ot two (must be 13mm).Remove these and the bumper comes off. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.