On 7/25/06, Walt Oliver <walt@waltnet.net> wrote: > > Greetings, all, > > I picked up a European washer tank with the high-pressure > headlamp-squirter pump along with the relay and wiring harnesses to make > it work. What I haven't found anywhere is a diagram or description of > whether the fluid circuit for the headlights includes check valve(s)--I > assume it must--and what their part numbers might be. Anyone have any > tips? > > The diameter of the hose from the high-pressure pump is huge compared to > those in my Saab or Mercedes. Wonder if VW expected Vanagons to get > especially dirty noses? > > Thanks, > Walt
I'll have look at my set-up, Walt, Did you get the whole grill or just the washers? The grill is reinforced on the backside with a steel rib. I assume this is to keep the washers from blowing themselves off and cracking the grill in the process.
BenT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.