Date:         Fri, 28 Jul 2006 19:20:07 -0500
Reply-To:     Max Wellhouse <maxjoyce@IPA.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Max Wellhouse <maxjoyce@IPA.NET>
Subject:      Re: Different Gas Gauge Question
Comments: To: Mike Collum <collum@VERIZON.NET>
In-Reply-To:  <44CAA508.5040400@verizon.net>
Content-Type: text/plain; charset=us-ascii; format=flowed;
              x-avg-checked=avg-ok-7428163B

Anything's possible, but the gas gauge is off way ore than the temp gauge.

DM&FS

At 07:00 PM 7/28/2006, Mike Collum wrote:

>Both the temperature and the gas gauges are affected by the voltage
>stabilizer.  Do you suspect that your temperature gauge is a tad flaky too?
>
>Mike
>
>
>Max Wellhouse wrote:
><snip>
>>I filled it when the needle was right at the half mark.  I put in 11
>>gallons on both
>>occasions. I know these things are flaky, but is that far enough oofto
>>warrant a look at the voltage stabilizer?
><snip>
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006


--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006