Date:         Mon, 24 Jul 2006 15:06:02 -0500
Reply-To:     Jeff Palmer <jpalmer@MTS.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeff Palmer <jpalmer@MTS.NET>
Subject:      Re: Removing Cigarette Lighter Socket
Comments: To: Kim Brennan <kimbrennan@MAC.COM>
Content-Type: text/plain; charset=ISO-8859-1

On a related note, I want to replace the illuminated green band around the lighter as it is no longer illuminating (although the lighter works ok).  Same process?  Is it wired through the lighter or separate?

Thanks
Jeff

>
> From: Kim Brennan <kimbrennan@MAC.COM>
> Date: 2006/07/24 Mon PM 01:05:01 CDT
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Removing Cigarette Lighter Socket
>
> I've done it, though my memory is a bit fuzzy on it.
>
> First, drop the glove box. It will give you easier access to the
> cigarette lighter's back side.
> 2nd disconnect the wiring.
> (here things get fuzzy)
> If I remember correctly, once the wiring is disconnected you should
> be able to move one of the tabs that holds the inside in place. This
> will allow you to finally get it out of the dash. You should be able
> to identify this visually. You definitely can't remove it with the
> wiring in place (unlike many other dash mounted things.)
>
>
> On Jul 24, 2006, at 12:17 PM, Craig Morton wrote:
>
> Does anyone know how to remove the cigarette lighter socket? Does
> anyone know how to remove the cigarette lighter socket without a
> crowbar?
>